¡ô INSTRUCTION
PCL-straight impacting crusher is a high-power and low-consumption equipment, which is researched by Mr. Bai Yinghui based on several years hard-working and learning mechanical equipment .It absorbed the advanced techniques of the same product of bamake company of America and is also on behalf of the international level. It plays an important roll in crushing mineral into pieces and any other type crusher can' t take place of it.
¡ô WORKING FUNCTION

The stuffs from the nupper of the machine,falling into the high-speed rotating impeller,strike with other stuffs which more around the impeller because of high-speed centrifugal force .After they strike matually,whirling fluid is produced between the impeller andoutercovering .Through repeatedly striking and rubbing ,the stuffs are crushed into pieces and straightly come out of the lower.The operating process forms into closed circuit,circulate repeatedly and then attains the fineness of the product.
¡ô USAGE
This product is extensive to used for all kinds of minerals, cement, fire-proof materials, aluminum soil the familiar£¬anticipating, the emery, glass raw materials, mechanism building sand, stone materials ,sand metallurgy of slag. It has the higher yield effect than other types,especially used to crush harder and causticity materials£¬ such as carborundum, emery, magnesium sand.
¡ô CHARACTERS
1. The construction is reasonable and simple, and the operating cost is low;
2. The broken-up rate is high, economic energy;
3. Having the function of thin ground and roughly grind;
4. Influenced by the material humidity is small, and the humidity contained can amount to 8%;
5. More suitable for breaking up mid-hard, super-hard materials;
6. Product is cube, the density for piling up is big and the iron pollution is smallest;
7. Leaf's round wears away from the is small, maintained conveniently;
The working noise is lower than 75 decibels and dust pollution is little .